Descubre publicaciones en tendencia en Twitter/X
Inspírate con el contenido más reciente y en tendencia de Twitter/X.
MVP MVP MVP! 💎 👉 Shane Larkin! 👏 #YellowLegacy #EuroLeague https://t.co/NSwGs77zxp
70K
9K
37
289
297K
457
20
52
Nov 15
𝐓𝐡𝐞 𝐏𝟐𝐏 𝐁𝐨𝐨𝐭𝐬𝐭𝐫𝐚𝐩: 𝐇𝐨𝐰 𝟕 𝐍𝐨𝐝𝐞𝐬 𝐅𝐢𝐧𝐝 𝐄𝐚𝐜𝐡 𝐎𝐭𝐡𝐞𝐫 🌐 A new WINkLink node doesn't discover its peers through a directory service. It doesn't query a DNS. It doesn't hit an API. It dials a multiaddress. The format: /ip4/127.0.0.1/tcp/6788/p2p/12D3KooWMrKGdnH6nBrf7hDz25NXFSFNk7vgsTxj9bHskWEct4xh Three layers, one string: → /ip4/127.0.0.1 — the IP address → /tcp/6788 — the port (always 6788 for WINkLink) → /p2p/12D3KooW... — the peer ID (derived from the node's cryptographic key) The peer ID is not an alias. It's a hash of the node's public key. It's unique. It's permanent. It's the node's identity on the P2P mesh. 𝐓𝐡𝐞 𝐁𝐨𝐨𝐭𝐬𝐭𝐫𝐚𝐩 𝐅𝐥𝐚𝐠 ⚙️ Every node config has a boolean: isBootstrapPeer. → isBootstrapPeer = true → the node is a bootstrap node. It listens for incoming connections. It's the entry point. Other nodes dial it first. → isBootstrapPeer = false → the node is a price feed node. It dials the bootstrap node, then discovers the remaining peers through the mesh. The bootstrap node config is minimal: → p2pBootstrapPeers = [own address] → forwardingAllowed = false → maxTaskDuration = "0s" → No observationTimeout → No blockchainTimeout → No transmitterAddress It doesn't produce observations. It doesn't submit to the chain. It exists to be dialed. The price feed node config is full: → p2pBootstrapPeers = [bootstrap node's multiaddress] → isBootstrapPeer = false → transmitterAddress = the node's TRON wallet address → observationTimeout = "10s" → blockchainTimeout = "20s" → contractConfigConfirmations = 3 The bootstrap node is the door. The price feed node is the worker. The door doesn't work. The worker doesn't open the door. 𝐓𝐡𝐞 𝐃𝐢𝐬𝐜𝐨𝐯𝐞𝐫𝐲 𝐅𝐥𝐨𝐰 🔄 1. The new node reads its p2pBootstrapPeers array from the TOML config. 2. It dials the bootstrap node's multiaddress over TCP port 6788. 3. The libp2p handshake fires. The bootstrap node verifies the new node's peer ID (its public key hash). 4. The bootstrap node sends the new node the multiaddresses of the other 5 price feed nodes. 5. The new node dials each of the 5. 6. The mesh is complete: 7 nodes, 21 pairwise connections, full mesh. No directory. No DNS. No API call. One multiaddress in a TOML file. The rest is the mesh finding itself. 𝐖𝐡𝐲 𝐥𝐢𝐛𝐩𝟐𝐩 🛡️ The transport is libp2p over TCP. Not a bare WebSocket. Not a raw socket. libp2p adds: → Identity verification (peer ID = public key hash) → End-to-end encryption (Noise protocol) → Stream multiplexing (multiple concurrent streams over one TCP connection) → NAT traversal (nodes behind firewalls can still connect) The 7 nodes don't need to be on the same network. They don't need port forwarding. They don't need a VPN. libp2p handles the transport. The TOML file handles the identity. The mesh handles the rest. 𝐓𝐡𝐞 𝐒𝐭𝐫𝐮𝐜𝐭𝐮𝐫𝐚𝐥 𝐏𝐨𝐢𝐧𝐭 🏗️ A 7-node oracle doesn't need a discovery protocol. It needs one address in a config file. The bootstrap node is that address. The peer ID is the identity. The multiaddress is the path. The mesh is the result. Four components. One TCP port. Seven nodes. Twenty-one connections. No central directory. No single point of failure for discovery. If the bootstrap node goes down, the other 6 are already connected to each other. The mesh persists. The bootstrap node is only needed for the next node to join. #TRONEcoStar @justinsuntron @WinkLink_Oracle
107K
1
0
0
16K
161
16
12
26K
317
19
30
16K
263
24
8
Nov 14
MVP! MVP! MVP! Olivia Chisholm is the 2026 #NSL Final MVP ‼️ @AFC_Toronto https://t.co/q7HvOyFyyf
15K
74
1
8
Nov 16
🤯 FOUR teams play on a back-to-back today! 📊 So I gathered data about who plays better on back-to-backs. See the 4 guys that you should target in those games.👇 🍀 Jayson Tatum - 40+ PRAs vs ORL Tatum has played three B2B games this season, going 2/3. He’s up against the Magic and their 26th ranked defense against Forwards. He’s coming off a big 32 PTS, 6 REB and 6 AST vs the Mavs, and P. George will probably not play today! — 🧙♂️ Alexandre Sarr - 20+ PRs vs MEM Sarr loves a B2B game. Coming off 39 PRs against Detroit and 29 PRs against OKC in his last two B2B games, he’s a favourite to see a lot of the ball against Memphis who are missing most of their big guys. — 🚀 Reed Sheppard - 10+ Points @ MIA Sheppard is 12/14 on this line on B2Bs vs a Heat team that rank #30 against his position. He had 19 Pts in his previous B2B game vs ATL. The Heat allow the most ATB threes in the league, where Reed is lethal. — ☀️ Collin Gillespie - 10+ Points @ DEN Gillespie’s hot zone is ATB threes and C&S, he should be effective against the bad Nuggets perimeter defense. (Who didn’t re-sign him 14 months ago). He was great yesterday and Phoenix will look to him on a B2B, as he’s cashed this in 14/17 B2B games going back to last season (82% hit rate). 💾 Save this data and thank me later!
15K
51
3
3
13K
105
16
5
Nov 13
Our goal is to have an entrepreneur in every family in Andhra Pradesh. At the AP Startup Exchange (APEX) by @RTIH_AP, we honoured 6 outstanding startup founders and handed over ₹2.11 cr to 31 startups, the first tranche of support under the AP Startup & Innovation Policy 2024. We are building 25 industry ecosystems, from cement to quantum, each vertically and horizontally integrated. When we believe in an entrepreneur, we back them all the way, like @SkyrootA and @SagarDefence. Keep the fire to succeed alive, and make AP and India proud! #CIIPartnershipSummit2026 #ChooseSpeedChooseAP #InvestInAP
14K
338
16
77
Publicaciones en tendencia ilimitadas con Publer
Obtén acceso completo a las últimas publicaciones en tendencia y gestiona todas tus redes sociales con Publer desde solo 4 $ al mes.
Explorar planesDescubre herramientas gratuitas que se recomiendan
Maximiza tu productividad y gestiona tu contenido sin esfuerzo con las herramientas gratuitas de Publer.
Create impactful social media content inspired by trending posts
Transforma las últimas publicaciones en tendencia en contenido atractivo para tu audiencia con Publer.
Programa tus publicaciones en redes sociales
Con un conjunto de herramientas potentes e interfaz amigable, podrás crear, previsualizar, programar y analizar tu contenido en redes sociales con facilidad.
Empieza gratis









